NCT02236559

High Flow Therapy for the Treatment of Respiratory Failure in the ED

Vapotherm High Flow Therapy for the Treatment of Respiratory Failure in the ED: A Randomized Controlled Trial

• Status: Completed
• Phase: N/A
• Study type: Interventional
• Enrollment: 204 (actual)
• Sponsor: Vapotherm, Inc. · Industry
• Sex: All
• Age: 18 Years
• Healthy volunteers: Not accepted

Summary

The overall objective of this study is to determine if Vapotherm high flow nasal cannula therapy (HFT), when used to treat respiratory failure in the ED, is at least equivalent to the current standard of care for non-invasive ventilatory support, non-invasive positive pressure mask ventilation (NIPPV). Moreover, this study will investigate the potential that HFT has possible advantages over NIPPV, such as decreased time to patient stability from respiratory failure, and the ease of use as a first line intervention for respiratory failure in the ED environment. The hypothesis is that HFT via the Vapotherm Precision Flow will demonstrate clinical non-inferiority when compared to NIPPV with regard to treatment failure by way of an impact on ventilation indices and a lower intolerance rate, and have a positive association with hospital disposition and length of stay.

Conditions

• Acute Respiratory Failure

Interventions

Type	Name	Description
DEVICE	Noninvasive positive pressure ventilation (NIPPV)	Patients will be fit with an oronasal mask using a fitting gauge that will be applied by a respiratory therapist or other clinician skilled in management of NIPPV. Initial pressures will be at low end of suggested range but can be increased as rapidly as necessary to alleviate respiratory distress. Targets should be to lower respiratory rate to the low 20s and achieve tidal volumes of 6-8 ml/kg ideal body weight. If patients find pressures uncomfortably high, they can be lowered as necessary by 1 to 2 cmH2O decrements to enhance tolerance. EPAP (PEEP) can also be adjusted upward as needed to reduce triggering effort (by counterbalancing auto-PEEP) or to improve oxygenation. FIO2 will be 1.0 initially to assure adequate oxygenation, but should be adjusted promptly to maintain an FIO2 of no greater than 0.6 with an EPAP (PEEP) of not more than 10 cm H2O to maintain a PaO2 \> 88%.
DEVICE	Vapotherm	Patients will be fit with a Vapotherm adult nasal cannula that will be applied by a respiratory therapist or other clinician skilled in management of HFT. Initial flow will be set to 35 L/min but can be decreased or increased as rapidly as necessary to alleviate respiratory distress and optimize patient comfort. Targets should be to lower respiratory rate to the low 20s and with a HFT flow rate between 20 to 35 L/min. Starting temperature will be between 35 to 37 C; if patients find the gas temperature to be uncomfortable, it can be lowered as necessary down to 33 C to enhance tolerance. FIO2 will be 1.0 initially to assure adequate oxygenation, but should be adjusted promptly to maintain an FIO2 of no greater than 0.6 to maintain a PaO2 \> 88%.

Timeline

• Start date: 2014-09-01
• Primary completion: 2016-09-01
• Completion: 2017-02-01
• First posted: 2014-09-10
• Last updated: 2019-05-23
• Results posted: 2019-05-23

Locations

5 sites across 1 country: United States