NCT04261062

Validity Test of Wearable Continuous Blood Pressure Measuring System

• Status: Unknown
• Phase: —
• Study type: Observational
• Enrollment: 220 (estimated)
• Sponsor: Yonsei University · Academic / Other
• Sex: All
• Age: 18 Years
• Healthy volunteers: Not accepted

Summary

1. Purpose of Research For the feasibility test of a wearable blood pressure measuring device, biometric data of patients in surgical intensive care is simultaneously obtained and stored from the device and a patient monitor. 2. Overview of Research Design This research is simply to obtain and store the data: 1) invasive arterial blood pressure measured with a patient monitor from one wrist, and 2) multi-wavelength photoplethysmography and pressure signal measured with the developed wearable device from the other wrist. 3. Medical Device for Clinical Trial Patient monitor (IntelliVue MX700, Philips, NED) and wearable blood pressure measuring device 4. Target Recruiting Number of Participants Considering the expected patient number in intensive care and 10% dropout rate during the research period, the target recurring number of participants is 220. 5. Criteria of Participant Inclusion 1. Adult patient in surgical intensive care of Severance Hospital 2. Voluntarily agreed to participate the research and not included to the exclusion criteria 6. Criteria of Participant Exclusion 1. Patient with occlusive peripheral arterial disease 2. Patient with cardiovascular disease of serious arrhythmia except atrial fibrillation 3. Patient administered high-dose of pressor agent over 15 mcg/min 4. Patient who is not available for measurement of invasive arterial blood pressure 5. Patient who is not available to wear an wearable device on the wrist 6. Pregnant woman, minor 7. Evaluation Parameter 1. Systolic and diastolic blood pressure, which extracted in mmHg unit from the continuous blood pressure output of patient monitor. 2. Blood pressure, which estimated by the signal analysis of multi-wavelength photoplethysmography and pressure signal measured with the wearable device. 8. Data Analysis and Statistical Methods 1. From the multi-wavelength photoplethysmography and multi-channel pressure signal measured, continuous blood pressure will be estimated through the hemodynamic model and machine learning model. 2. For the machine learning model, the data obtained will be divided into the training data and evaluation data, with the ratio of 80% and 20%. 3. In order to evaluate the accuracy of the estimated blood pressure, the invasive arterial blood pressure will be considered as the reference blood pressure. Between the estimated blood pressure and the reference blood pressure, the correlation and root mean square error (RMSE) will be calculated.

Detailed description

1. Recruit participants. 2. Explain the research purpose and details, and then have the participant sign the consent form. 3. Before starting the measurement, gather the participant's information such as age, length, and weight. 4. Measure noninvasive blood pressure in both arms. Compared to the blood pressure in the arm where inserted a catheter, confirm if difference of systolic or diastolic blood pressure in the other side of arm is not more than 10%. 5. Wear the wearable device on the opposite wrist from the catheter-inserted. 6. For 10 minutes, simultaneously obtain the data: 1) invasive arterial blood pressure measured with a patient monitor, and 2) multi-wavelength photoplethysmography and pressure signal measured with the developed wearable device. 7. For accuracy of data acquisition, repeat twice the procedure 5-7 by performing it in the morning and in the afternoon with the 5 hours interval.

Conditions

• Patients in Surgical Intensive Care

Timeline

• Start date: 2020-05-07
• Primary completion: 2022-01-01
• Completion: 2022-01-01
• First posted: 2020-02-07
• Last updated: 2020-07-23

Locations

1 site across 1 country: South Korea